In the demanding world of motorsport, every detail counts. Guaranteeing that the tires fitted to vehicles match those declared is essential to ensure fairness between competitors, avoid fraud and optimize technical inspection. CIPAM, in collaboration with Michelin Motorsport, has designed an automated tire detection solution that enables the conformity of tires used just before a race to be checked without human intervention. Thanks to on-board RFID technology, each vehicle passage is analyzed in real time, even at high speed.
“With the CIPAM system, we have achieved a reliability rate of 99.8% in dynamic reading”Philippe Planeix, Technical Advisor at Michelin Motorsport
Read Philippe Planeix's testimonial from Michelin Motorsport
Real-time technology, proven for over 10 years
- Automated high-speed reading (up to 120 km/h)
- Intelligent RFID gates installed on the output line
- RFID tags integrated into tires and vehicles
- Read all 4 tires + vehicle number in one pass
- from €450 excl. VAT/month*.
- or €21,550 (excl. VAT) direct purchase
* Your application is subject to acceptance by our financial partner.
Key benefits
- Automated tire control
- Reduce human error
- Saves time at every logistical stage
- Over 99% reliability in real-life conditions
- Complete tire and car monitoring
- Optimized audits and enhanced compliance
Technical specifications
- RFID gates with reader
- Antennas (read speed up to 120 km/h)
- RFID chips in tires and on vehicles
A well-known business problem
In endurance racing, tire monitoring is a real challenge. At every race, hundreds of tires are mounted, dismounted and reused. And each tire must be rigorously identified, traced and checked. Philippe Planeix, Technical Advisor at Michelin Motorsport, gives us his opinion on the automated tire detection solution developed by CIPAM:
Michelin Motorsport has been using RFID chips embedded in its tires for over ten years. Until now, the readings were taken manually or at the factory. But the growing demands of competition have called for a new approach: reading data automatically, in real-life conditions, with vehicles in motion.
CIPAM’s innovative solution
Against this backdrop, CIPAM has developed a tailor-made solution: an RFID gantry capable of dynamically reading the 4 tires of a racing car… travelling at 60 km/h.
👉 This system also reads the car’s number, for complete traceability every time it passes.
👉 It enables automated identification of tires as soon as they enter the control zone.
Result: an exceptional reliability rate
Thanks to the close collaboration between the Michelin Motorsport and CIPAM technical teams, the results exceeded expectations:
- 99.6 to 99.8% dynamic read reliability
- Deployment at several international events
- Significant reduction in errors and processing time
“This is huge, because we’re talking about dynamic measurements, with cars in motion,” stresses Philippe Planeix.
A partnership based on trust and co-construction
This success is also due to the close collaboration between the two companies. CIPAM’s teams visited the site, provided responsive field support, and set up a post-course hotline for ongoing system improvements.
“We weren’t working with a service provider, we were working with colleagues,” sums up Mr. Planeix.
Would you like to find out more about our automated tire detection solution?
Let’s discuss your needs
We operate worldwide