Why use an offline barcode verifier (ISO)?
An offline barcode verifier helps you objectify quality and standardize your practices, without depending on the sensitivity of a reader or operator.
Typical use cases :
- incoming inspection (labels, consumables, subcontracting)
- start-of-series control (validation of settings before launch)
- final inspection (before shipment)
- claim control (proof, cause analysis)
- workshop control/audit (quality, continuous improvement)
If your codes degrade after production (abrasion, humidity, chemistry…), also link this step to : Marking protection
ISO barcode verifier: what quality controls for your 1D / 2D codes?
A “read / don’t read” scanner. An ISO barcode verifier measures and produces results that can be used for quality and production: deviations, non-conformities, improvements.
Examples of common controls:
- symbol quality (defects, contrast, structure, etc.)
- robust readability on first scan (measured quality)
- consistency of encoded content (according to your internal rules)
- comparisons and trends (useful for qualifying a setting or supplier)
Would you like to standardize your controls and reduce non-conformities?
Request a “verification / conformity / traceability” diagnosis
OMRON LVS 9510: desktop off-line barcode verifier (1D/2D)
The OMRON LVS 9510 is a desktop verifier designed for quality control in dedicated workstations: receiving, series start-up, final inspection, supplier/consumables qualification.
OMRON LVS 9510: for what uses (acceptance, start of series, final inspection)?
- central quality station (reception / release)
- validation before production launch
- final pre-shipment inspection
- multi-site standardization
OMRON LVS 9510: key points and field of view options
- 5 field-of-view options: 44 mm to 155 mm
- 1D + 2D code verification
- automatic detection of codes on glass
- comparison (where applicable): plaintext vs. encoded data
OMRON LVS 9580: portable offline barcode verifier (1D/2D)
The OMRON LVS 9580 is a portable model, ideal for field/workshop inspections, audits, or spot checks on lines and logistics areas.
OMRON LVS 9580: field inspection, workshop audit and supplier qualification
- workshop control without tying up a quality station
- auditing and rapid troubleshooting (drift analysis)
- supplier qualification (proof and standardization)
- pre-shipment checks in logistics zone
OMRON LVS 9580: fields of view, 5 MP camera and 1D/2D licenses
- fields of view: 76×57 mm, 45×45 mm or 20×20 mm
- 5 MP camera
- 1D/2D, 1D only, 2D only versions (upgradeable licenses)
1D 2D code checker: how to choose between LVS-9510 and LVS-9580?
Choose the LVS-9510 if you have :
- a fixed quality station (reception / final inspection)
- standardized, repeatable controls
- a centralized “quality process” logic
Choose the LVS-9580 if you have :
- field/workshop inspections
- frequent quality audits and investigations
- a multi-zone or multi-site organization requiring mobility
FAQ - Off-line barcode verifier (ISO)
Frequently asked questions
It objectively measures the quality of a 1D/2D code during spot checks (reception, start of series, final inspection). It is used to qualify a setting, a support or a supplier, and to reduce non-conformities.
The LVS-9510 is a desktop verifier (quality station). The LVS-9580 is a portable verifier, designed for field/workshop inspections, with multiple fields of view and upgradeable 1D/2D licenses.
Off-line is suitable for spot checks and qualification. On-line inspection is recommended if you need to inspect continuously, at 100% speed, and detect drift immediately.
Would you like to standardize your controls and reduce non-conformities?
Request a “verification / conformity / traceability” diagnosis