WMS RFID traceability software

Traceability software and integration with your ERP, WMS, and MES

CIPAM designs, deploys, and integrates RFID and barcode traceability software for industrial departments, logistics managers, and CIOs who want every inventory movement, every production step, and every shipment to be automatically recorded in their ERP, WMS, or MES systems. Our role is to capture on-the-ground events using the right hardware, convert them into actionable data, and transmit them to your existing information system without the need for re-entry or duplicate data entry. The tangible result for your teams is simple: reliable, real-time inventory data, enhanced regulatory traceability, and operators who save time on manual data entry tasks. To get started, an initial consultation is all it takes to map out your workflows, your existing information system, and the scope of integration that will be most beneficial.

Talk to a CIPAM integrator

The Essentials

  • There are three distinct layers. A raw read (RFID tag detected, barcode scanned) is not a business event. A business event is not yet data recorded in your ERP or WMS.
  • Middleware is not used systematically. For a simple need, a direct connection between a terminal and your ERP system may be sufficient. Traceability software is primarily used when workflows become more complex.
  • Integration is achieved via APIs, connectors, or file transfers, regardless of the vendor of your ERP, WMS, or MES.
  • CIPAM has been a full-service integrator since 1993: capture hardware, software, and interfacing are all handled by a single point of contact.

From Raw Data to Business Data

On the ground, a fixed RFID reader, a gantry antenna, or a barcode scanner captures raw data: a tag ID, a scanned code, a timestamp, and sometimes the antenna’s location. This raw data has no business significance in and of itself. It could represent a duplicate—the same tag read multiple times by several nearby antennas—read noise, or an actual movement of goods.

It is the role of traceability software—sometimes referred to as middleware—to transform this raw data stream into a meaningful business event: a pallet leaving a shipping dock, a batch entering the quality control area, or a production order moving from one stage to the next in the RFID chain. The middleware filters out duplicates, applies zone and threshold rules, and then groups the relevant reads into a dated and qualified event.

This business event is then transmitted to your ERP, WMS, or MES, where it becomes recorded data: a stock movement, a production output, or an updated order status. This chain—raw data, then business event, then recorded data—forms the backbone of any RFID or barcode traceability project connected to an information system.

What Middleware Does and What It Doesn’t Do

Traceability software has a specific and clearly defined role. It is not intended to replace your ERP or WMS; rather, it complements them to ensure the reliability of the data reported from the field.

What it does

It filters and deduplicates RFID readings from multiple antennas. It applies business rules specific to your zones and processes, such as goods received, goods shipped, or a checkpoint. It aggregates the readings into dated and categorized events. It converts these events into a format that your ERP, WMS, or MES can understand. It can also buffer the data in the event of a network outage to ensure that no transactions are lost.

What it doesn’t do

It does not handle accounting, invoicing, or purchasing—that remains the role of your ERP. It does not optimize storage locations or picking routes on its own—that remains the role of your WMS. Nor is it a mandatory component in every project. Some simple traceability needs can be met with a direct connection between a mobile device and the ERP, without an intermediary layer. Middleware truly comes into its own when data flows multiply, when multiple types of sensors are used simultaneously, or when multiple systems need to receive the same information without duplicate data entry.

Integrate with your existing IT system

A successful traceability project is not judged solely by the quality of RFID or barcode scans. It is judged by how seamlessly that data is integrated into your information system. CIPAM interfaces its industrial integration software with the ERP, WMS, and MES systems already in place at its customers’ sites, regardless of the vendor.

Several connection methods are available depending on your architecture: REST APIs for real-time data exchange, preconfigured connectors for the most widely used software packages, structured file exchanges for legacy systems, and message queues for high-volume data flows. The choice depends on your ERP, WMS, or MES, your network constraints, and the volume of events to be transmitted.

We work with SAP, Oracle, Microsoft Dynamics, and Sage environments, as well as with more specialized business software packages and in-house developed WMS and MES systems. When your processes deviate from industry standards, we also develop custom business applications to complement your existing infrastructure. The goal remains the same: to ensure that traceability data reaches the right place, in the right format, and without the need for re-entry.

For your CIO, integration goes beyond technical details. It includes securing data exchanges, logging events for your quality or regulatory audits, and adhering to the formats already standardized within your company—whether they’re EDI, XML files, or JSON feeds. We document every interface we implement so that your internal teams can maintain control over the system’s evolution once the project is delivered.

Comprehensive integrator, single point of contact

Many industrial traceability projects fail not because of poor software, but because of a patchwork of service providers who don’t coordinate with one another: an RFID hardware vendor, a software vendor, an ERP integrator, and sometimes a network installer. When an incident occurs, each party shifts the blame to the next. The problem drags on while production or shipping waits for a fix.

CIPAM has been a systems integrator since 1993. We select and deploy data capture hardware, RFID readers, antennas, barcode scanners, and label printers. We develop and configure traceability software. We also handle integration with your ERP, WMS, or MES systems. You’ll have a single point of contact from the requirements specification through maintenance, whether on-site or for the software.

This comprehensive approach minimizes technical uncertainties and speeds up incident resolution, since the same team is familiar with the installed hardware, the software configuration, and how data is fed into your information system.

The CIPAM Solution

Traceability software integrated with your ERP, WMS, and MES

CIPAM combines field data collection, software, and integration to provide traceability that truly feeds into your information system—not just a standalone dashboard.

How to Get Started

An integration project between traceability software and your ERP, WMS, or MES is implemented in stages, without causing a major disruption to your information system.

1. Audit of Your Workflows and IT System

We map out your physical workflows (receiving, production, shipping, returns) and your existing information systems: ERP, WMS, MES, databases, and existing data exchange formats.

2. Scoping Workshop

Together, we define the business events to be generated, the data to be reported, and the integration method best suited to your existing architecture.

3. Pilot program on a limited scale

Before a full-scale deployment, a pilot program on a production line, in a warehouse, or in a workshop allows you to verify the reliability of the readings and the quality of the integration with your ERP or WMS.

4. Deployment and Support

Once the pilot has been approved, we roll out the solution at scale, train your teams, and provide support for both the hardware and the software.

Request an audit of your data flows

Frequently asked questions

What is industrial traceability software?

This software captures RFID or barcode scans from the field, converts them into business events—such as a stock transfer or a production step—and then transmits them to your ERP, WMS, or MES as recorded data.

Is middleware required to connect RFID to my ERP system?

No. For a simple use case involving a single type of sensor and few business rules, a direct connection between a terminal and the ERP system may be sufficient. Middleware becomes useful when data flows become more complex or when multiple systems need to receive the same information.

What is the difference between an RFID read and a business event?

An RFID read is raw data: a tag identifier captured by an antenna at a given moment. A business event is an interpretation of that read, such as an inventory withdrawal or a completed quality control check. The traceability software connects the two.

Can CIPAM be integrated with my current ERP system?

Yes. We integrate our traceability software with most ERP, WMS, and MES systems on the market via APIs, preconfigured connectors, or file exchanges, regardless of which vendor you currently use.

How long does an integration project take?

It depends on the scope and complexity of your existing information system. A pilot project on a limited scale generally allows you to validate the approach before a broader deployment, which helps ensure the overall project schedule.

Does the traceability software also work with barcodes?

Yes. The same traceability software can process RFID scans, barcode scans, or a combination of both, depending on the areas and processes at your site.

What is the difference between CIPAM and an ERP or WMS vendor?

An ERP or WMS vendor designs and develops its management software. CIPAM steps in to complement this effort as an integrator: we capture field data using the right hardware and interface it with your existing ERP or WMS, without disrupting your management system.

Talk to a CIPAM integrator Understanding RFID Technology

Learn more: industrial integration software, custom business applications, RFID inventory software, RFID technology, and RFID readers and antennas.

Let’s talk about integrating your traceability system

Please describe your workflows and your current ERP, WMS, or MES. A CIPAM integrator will contact you to outline the initial steps.


EXCELLENT
Google star 1Google star 2Google star 3Google star 4Google star 5
Based on 57 reviews
Posted on Google Google
Kristel L
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
They provided excellent support from start to finish. The team was available, responsive, and able to find solutions tailored to our needs. A reliable partner that I recommend without hesitation.

(Translated by Google, see original)
Posted on Google Google
Jean-Matthieu M
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
As part of our traceability projects at Alcatel Submarine Networks, I sought the expertise of CIPAM. We were impressed by the availability, friendliness, and high level of professionalism of their team. Their keen understanding of our needs led to very relevant recommendations that we are currently reviewing. We are also seriously considering continuing our collaboration with CIPAM for the integration phase. A big thank you and congratulations on the quality of your support!

(Translated by Google, see original)
Posted on Google Google
Cyrille K
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I highly recommend CIPAM and its entire team; they listen to our requests, are proactive, and very efficient. They always find a solution.

(Translated by Google, see original)
Posted on Google Google
Julien B
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Highly professional and comprehensive support. CIPAM was present from the project definition to its completion.

(Translated by Google, see original)
Posted on Google Google
Lionel S
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Highly recommended professionals for their professionalism, expertise and the quality of their support.

(Translated by Google, see original)
Posted on Google Google
Violaine D
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I had the pleasure of working with Isabelle and Corrine, who are both exceptional. They are always available to answer our questions and have extensive knowledge of traceability systems. I highly recommend this company :-)

(Translated by Google, see original)
Posted on Google Google
Céline M
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Top-notch expertise, I recommend them without hesitation!

(Translated by Google, see original)
Posted on Google Google
Virginie C
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Top team 👌

(Translated by Google, see original)
Posted on Google Google
Raphael
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I highly recommend them! I found them to be competent, friendly, and very professional. True RFID experts! 👌

(Translated by Google, see original)
Posted on Google Google
Louis B
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I highly recommend them, the team is fantastic 👍🏼 Quality, attentiveness, and excellent after-sales service

(Translated by Google, see original)
Verified by Trustindex
Trustindex verified badge is the Universal Symbol of Trust. Only the greatest companies can get the verified badge who has a review score above 4.5, based on customer reviews over the past 12 months. Read more

Opening hours

Monday to Thursday: 8:30am-12pm | 2pm-5:30pm
Friday: 8:30am-12pm | 2pm-5pm

Book a meeting

Clermont-Ferrand

HQ
15 route du Cendre
63800 Cournon d’Auvergne, FRANCE
+33 4 73 26 95 16

Privacy Preference Center