UWB Technology: How Ultra-Wideband Location Works in Industry
By the CIPAM location projects team · Updated November 11, 2026
UWB has made its way into smartphones and car keys. In industry, it has long served another purpose: knowing at all times where a tool, a vehicle, a person or a piece of equipment is, to within a few dozen centimeters. Today it is the reference technology when location has to be precise indoors, where GPS is no longer enough.
This guide explains how UWB works, what accuracy you can really expect in the field, what needs to be installed and when another technology is the better choice.
Discuss my UWB project with an expert
Key points
- UWB measures time of flight. It calculates the distance between a tag and fixed anchors from the time a radio pulse takes to reach them.
- Accuracy is 10 to 30 cm in good conditions. It stays below one meter in the most obstructed environments.
- It requires an infrastructure: tags on what you track, anchors on site, a location engine and an API to your tools.
- Useful accuracy drives the project. Where a location within a few meters is enough, BLE or RFID cost less.
What is UWB technology?
UWB, short for Ultra-Wideband, is a short-range radio technology. Instead of transmitting a continuous signal on a narrow frequency, like Wi-Fi or Bluetooth, it sends extremely short pulses, on the order of a nanosecond, spread over a band wider than 500 MHz.
This has two consequences. First, such a short pulse can be timestamped very precisely, which makes it possible to measure distances to the centimeter. Second, the energy is spread over a wide band at very low power: UWB coexists easily with the other radio networks on an industrial site.
In Europe, UWB use is harmonized by Commission Implementing Decision (EU) 2019/785, which sets the authorized frequency bands and power levels. The IEEE 802.15.4z standard defines secure ranging, the same one used by smartphones and digital car keys.
How does UWB calculate a position?
The principle is time of flight. A radio wave travels about 30 centimeters per nanosecond. By measuring how long a pulse takes to travel from a tag to an anchor, you get the distance between them. With at least three anchors, the location engine calculates the tag’s position by trilateration, in two or three dimensions.
Two measurement methods coexist. The choice between them determines tag battery life and how many objects can be tracked.
In TWR, the tag talks to each anchor. In TDoA, it sends a single pulse that synchronized anchors timestamp.
| Criterion | TWR (Two-Way Ranging) | TDoA (Time Difference of Arrival) |
|---|---|---|
| Principle | The tag exchanges messages with each anchor, one after the other | The tag sends a pulse, the anchors timestamp its arrival and the server compares the differences |
| Anchor synchronization | Not required | Required, the anchors share the same clock |
| Tag battery life | Shorter, the tag transmits and receives | Several years at one position per second |
| Number of tags | Limited by exchange time | High, suited to large fleets |
| Position known by | The tag itself | The server |
| Typical use | Guidance, proximity safety, small sites | Tracking assets, machines and vehicles at scale |
To track hundreds of tags across a workshop, a warehouse or a depot, TDoA is the most common choice. TWR remains the better option when the tag itself needs to know its position, for example to trigger an on-board alert.
What accuracy can you expect in the field?
Datasheets often claim 10 centimeters. On a real site, accuracy depends on three factors.
Line of sight between tag and anchors
UWB performs best when the tag can see the anchors without obstruction. A metal rack, a machine or a vehicle in between lengthens the signal path and degrades the measurement. That is why anchors are mounted high.
Anchor density and geometry
A tag must be seen by at least three anchors, ideally spread around it. The denser and more regular the grid, the more stable the position. Conversely, at the edge of the covered area, accuracy drops quickly.
The environment
An open office and a fleet of 3-meter-high buses parked close together are not the same challenge. In the most difficult environments, the target is sub-meter accuracy, enough to know which bay or which machine an object is in front of. A coverage study, first on plans and then on site, sets a realistic target before any investment.
The point people underestimate:
“The accuracy a manufacturer advertises is measured in good conditions. What matters is the accuracy your process needs: the parking bay, the workstation, the danger zone. We size the infrastructure on that need, not on the datasheet.”
The CIPAM location projects team
UWB, BLE, RFID or GPS: which technology for which need?
UWB is not always the right answer. The table below positions the most common technologies. For a detailed comparison, see our guide RTLS or RFID: which technology for real-time tracking.
| Technology | What it gives you | Accuracy | Cabling | Where it excels |
|---|---|---|---|---|
| BLE RSSI | Continuous position | A few meters, low accuracy | No, battery-powered beacons and tags | Zone tracking over large areas, with the cheapest tags |
| Standard UWB TDoA | Continuous position | 10 to 30 cm | Anchors usually wired (power, synchronization) | Workshops and warehouses where running cables is easy |
| UWB with autonomous anchors (CIPAM solution) | Continuous position | 10 to 30 cm in line of sight, under 1 m in difficult environments | No, battery-powered anchors | Depots, yards and large sites that are hard to cable, finding a specific object, machine and pedestrian safety |
| UHF RFID | Passage at a point | By zone or read point | Readers powered at choke points | Flows, inventory, dock door control |
| GPS | Outdoor position | A few meters, degraded under cover | No | Tracking on the road or between sites |
On the same site, these technologies are often combined: RFID at choke points, BLE for large areas and UWB where precise positioning really adds value.
What do you need to install for UWB location?
A UWB installation has four building blocks.
From measurement to business software: the tag, the anchors, the gateway and the location engine feed your tools through an API.
- Tags attached to what you track: tool, container, cart, badge worn by a person, vehicle. They run on batteries.
- Anchors, fixed reference points mounted on walls, roof structures or poles. Depending on the range, they are PoE- or battery-powered.
- A gateway or server that collects the measurements, over Ethernet or a wireless network.
- A location engine and an API that calculate positions, manage zones and pass the information to your software: ERP, WMS, MES, CMMS or monitoring.
You will find the products we deploy in our range of UWB tags, anchors and beacons, including UWB smart beacons and safety beacons for machine and pedestrian co-activity.
When does UWB make the difference?
Finding a specific tool or asset
Tooling, containers, subassemblies, equipment shared between workshops: UWB eliminates searching on foot and feeds a permanent inventory. It is at the heart of industrial asset tracking and tool tracking.
Securing machine and pedestrian co-activity
A forklift and an operator equipped with UWB tags detect each other. The measured distance triggers an alert or a slowdown before the risk materializes.
Locating staff in sensitive areas
On an ATEX or SEVESO site, knowing who is in which zone in real time makes evacuation and access control easier. See our page on staff location in sensitive areas.
Managing vehicles on a site
Bus depots, maintenance centers, logistics yards: UWB shows which bay, which charger or which row each vehicle is in, indoors and outdoors. This is the purpose of our bus depot location solution, which takes into account the charging constraints of electric fleets.
Tracking production flows
Linked to a production order, a UWB tag reveals waiting times, detours and bottlenecks. For batch-level tracking from one workstation to the next, see RFID work-in-progress tracking. The data is then used to reorganize the workshop based on facts.
How does a UWB project unfold?
- Define the need. What are you tracking, with what useful accuracy and for what decision? This step avoids oversizing the infrastructure.
- Study coverage. Plan analysis, site visit, identification of mounting points and obstructed areas.
- Measure before investing. A portable kit set up for a few days or weeks quantifies the expected gains and validates accuracy.
- Deploy. Installation of anchors and tags, configuration of zones and alerts, usually while the site keeps operating.
- Integrate. Connection to your software via API, team training and long-term follow-up.
How much does a UWB installation cost?
The budget depends on four parameters: the area covered, the number of tracked objects, the target accuracy and the complexity of the building. The finer the accuracy and the more obstructed the environment, the denser the anchor grid.
As a rough guide, equipping a depot of 150 buses over about 15,000 m² starts at around €25,000 excluding tax for the hardware, excluding the study, installation, integration and platform subscription. A CIPAM expert can help you estimate the expected return before a detailed quote.
CIPAM support
An integrator that chooses the useful accuracy
Since 1993, CIPAM has designed and deployed traceability and location projects. The same team studies radio coverage, selects and installs the hardware, configures the platform and connects it to your information system.
- Coverage study on plans, then on site
- UWB, BLE and RFID combined zone by zone
- API integration with your business tools
- Maintenance and support by a team based in France, certified partner of a UWB manufacturer (see our certifications)
Frequently asked questions
What does UWB stand for?
UWB stands for Ultra-Wideband. It is a radio technology that sends very short pulses over a very wide frequency band. It is mainly used to measure distances and to locate objects or people with high accuracy.
How accurate is UWB?
Around 10 to 30 centimeters in good conditions, with a direct line of sight between the tag and the anchors. In heavily obstructed environments, such as a bus depot or a workshop full of metal, the realistic target is sub-meter accuracy. A coverage study sets the achievable goal.
What is the range of a UWB anchor?
A few dozen meters in line of sight. In practice, anchors are spaced about 20 to 30 meters apart so that each tag is always seen by at least three of them. Actual range depends on obstacles and mounting height.
UWB or BLE: which one should I choose?
UWB when you need to know exactly where an asset, a person or a vehicle is. BLE when a location within a few meters is enough and you want to cover a large area at a lower cost. The two are often combined on the same site.
How long does a UWB tag battery last?
From a few months to several years. It depends on how often the position is updated and on the measurement method: in TDoA, the tag only transmits and its battery lasts several years at one position per second.
Does UWB interfere with Wi-Fi or site equipment?
No. UWB transmits at very low power over a wide band, which limits interference with Wi-Fi, Bluetooth or industrial networks. Its use is regulated in Europe by a spectrum harmonization decision.
Does the whole installation need cabling?
Not necessarily. Some infrastructures use PoE-powered anchors, others use battery-powered anchors mounted without cables. The choice depends on the site, the target accuracy and installation constraints.
Have a UWB location project?
Tell us what you want to track, the area and the accuracy you need. A CIPAM expert will suggest the right architecture.
Read also: RTLS or RFID, industrial asset geolocation, bus depot location and the industrial traceability glossary.